Preface The STM32 microcontroller has an internal temperature sensor. The sensor is very rough (±1.5 °C) and is connected internally to one of the ADC channels, making it possible to easily obtain device temperature without the need for any additional components. However, please note that this temperature is a relative temperature, not an absolute temperature, […]
Internal Temperature Sensor On STM32 Read More »
IAP Preface IAP (In Application Programming) refers to the process of programming a portion of the User Flash during the runtime of a program. The purpose is to facilitate the update and upgrade of firmware programs in the product through a reserved communication port after the product has been released. IAP Flow Here we will
STM32 USB_Device IAP practice Read More »
Introduction The VL53L5CX system consists of a hardware module and an ULD software (VL53L5CX ULD) running on the host. The hardware module contains a Time-of-Flight (ToF) sensor. ST provides a software driver, referred to as the “driver” in this document, which describes the functions of the driver that the host can access. These functions control
ST TOF Sesonr-VL53L5(Turnkey gesture) Read More »
Preface In this article, we will explain how to use the CDC (Communication Device Class) in USB to create a virtual COM port (VCP) for communication. On the one hand, for the host computer, it appears as a serial port, and all operations are still based on serial port operations. On the other hand, the
STM32 USB_Device(CDC_Standalone) Read More »
Preface Currently, ST has two sets of USB drivers. One is the early independent version USB driver, referred to as the Legacy library in official training materials. The other is the driver for its Cube series, which may vary depending on the chip used. Please refer to the corresponding Cube driver package for the specific
STM32 USB_Device(DFU_Standalone) Read More »
一、introduction 1、Principle We use a 940nm Vertical-Cavity Surface-Emitting Laser (VCSEL) to emit laser light, which reflects back when it hits an obstacle and is then received by the VL53L0X. The time it takes for the laser to travel in air is measured to obtain the distance. Knowledge about VCSEL. 2、Parameter 二、HW Connection layout, I2C lines
VL53L0X TOF Sensor Introduction Read More »
An Introduction to USB-HID A Descriptor is a complete data structure that can be implemented through programming languages such as C, and stored in a USB device. It is used to describe all the attributes of a USB device, and the USB host requests this information through a series of commands. There are 5 standard
USB-HID on STM32H750(Host)-1 Read More »
TouchGFX TouchGFX Key Features TouchGFX provides support for System structure Preparatory work – Installation and Configuration As we are using H750, we will need an external plugin for the flash part, so the initial configuration will be relatively complex. Here, we will directly focus on the memory configuration and provide detailed instructions. Install TouchGFX via
TouchGFX Introduction(STM32H750) Read More »
Features and Applications FEATURES APPLICATIONS Electrical and optical characteristics Pin Assignment Reliability Operation method Accomplish by using STM32F302 Refer
LDM_Module_RPS800(TOF Measuring) Read More »
Preface ST has launched two highly integrated software solutions for AI applications, namely NanoEdge AI and CubeAI, to help users quickly adopt the technology. Today, we will mainly introduce NanoEdge AI, from operation to generating files and porting them into the MCU. The advantage of NanoEdge AI is its simple interface and the fact that
NanoEdge AI Apply on ST MCU Read More »
